Posts

Ross Lovegrove’s 100% Lamp

Italian lighting manufacturer Danese has commissioned designer Ross Lovegrove for a fixture called the 100% Lamp – a simple, controllable fixture with an interesting design feature – the circuitry is on the outside of the lamp:

lovegrove-100-percent

The design is simple and elegant – bent aluminum sheet with a white paint coat, and the circuitboard/control affixed.  The control device is a screen-printed BAS plastic card that is also affixed to the unit, and control of intensity is via a sensor embedded within the card.  The orange circuitboard on the rear of the lamp is Kapton material, used in flexible printed circuits.

The LED source for the lamp is a cluster of 3 X 5W LEDs with an efficacy of 70 lumens per watt.

From the Danese Milan site:

The inclination of the head is dictated by a LED angle calculation so that an equilibrium between the correct illumination of a wide work area and the dazzling monitoring can be achieved. The challenge of a substantial technological innovation is faced by relying on overall “subtraction” principles. The body of the lamp is composed of a very light sheet of aluminium 5 mm thick, cut and softly bent. The base widens forming an area different from the worktop on which to store personal belongings.

On the front of the body of 100% Al light is integrated Danese’s technologically advanced switch. You insert a serigraphed ABS card into the aluminium body, which contains the sensor that regulates the turning on and the intensity of light emission. The feeding and the connection among the LEDs, the touch dimmers and the electronic components can only work in the flexible Kapton circuit. This combination of technology and innovative design rises in the Metadistretti project environment and it is developed by Danese in partnership with Micromac.

Check out more images:

100-by-ross-lovegrove-for-danese-17

lovegrove-100

lovegrove

lovegrove-100percent

lovegrove-100-percent-lamp

Thanks, DeZeen and DesignBoom!